Lead4pass 3V0-42.20 Dumps Actual Exam Practice Material Help You To Clear Exam 2023-01

3V0-42.20 Dumps Practice Material

3V0-42.20 dumps play a key role in preparing to pass the VMware 3V0-42.20 exam, providing real practice material for the exam to ensure a successful pass.

Lead4pass 3V0-42.20 dumps (PDF or VCE) https://www.leads4pass.com/3v0-42-20.html Updated 3V0-42.20 exam practice material with the latest and most accurate answers 57+, worth learning.

Easily Pass 3V0-42.20 Exam with Updated Real 3V0-42.20 Exam Materials

The following questions and answers are from the latest 3V0-42.20 free dumps.

Question 1:

Which is a family of solutions for data center designs that span computing, storage, networking, and management, serving as a blueprint for a customer\’s Software Defined Data Center (SDDC) implementations. (Choose the best answer.)

A. VMware SDDC Design

B. VMware Validated Design

C. VMware POC Design

D. VMware Cloud Foundation

Correct Answer: B


Question 2:

Which three IPv6 features are supported in an NSX-T Data Center design? (Choose three.)

A. IPv6 OSPF

B. IPv6 static routing

C. IPv6 switch security

D. IPv6 DNS

E. IPv6 Distributed Firewall

F. IPv6 VXLAN

Correct Answer: BCE

Reference: https://blogs.vmware.com/networkvirtualization/2019/02/ipv6-support-in-nsx-t-2-4.html/


Question 3:

An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.

This information was gathered during a workshop:

Some workloads should be moved to a Cloud Provider.

Extend network\’s VLAN or VNI across sites on the same broadcast domain.

Enable VM mobility use cases such as migration and disaster recovery without IP address changes.

Support 1500-byte MTU between sites.

Which selection should the architect include in their design? (Choose the best answer.)

A. Load Balancer

B. Reflexive NAT

C. SSL VPN

D. L2 VPN

Correct Answer: D


Question 4:

An architect is helping an organization with the Physical Design of an NSX-T Data Center solution. This information was gathered during a workshop:

Some workloads should be moved to a Cloud Provider.

Extend network\’s VLAN or VNI across sites on the same broadcast domain.

Enable VM mobility use cases such as migration and disaster recovery without IP address changes.

Support 1500-byte MTU between sites.

Which selection should the architect include in their design? (Choose the best answer.)

A. Create a vSphere Distributed Switch (vDS) for the Management VMkernel traffic and assign one NIC. Also, create an NSX-T Virtual Distributed Switch (N-VDS) for overlay traffic and assign one NIC.

B. Create an NSX-T Virtual Distributed Switch (N-VDS) for the Management VMkernel traffic and assign one NIC. Also, create an NSX-T Virtual Distributed Switch (N-VDS) for overlay traffic and assign one NIC.

C. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMKernel and overlay traffic and assign both NICs.

D. Create an NSX-T Virtual Distributed Switch (N-VDS) for Management VMkernel and overlay traffic and assign a new virtual NIC.

Correct Answer: A


Question 5:

What selection is the key design benefit provided by a dedicated Edge Cluster VM or Bare Metal? (Choose the best answer.)

A. reduced administrative overhead

B. predictable network performance

C. multiple Tier-0 gateways per Edge Node Cluster

D. support for Edge Node Clusters with more than 10 Edge Nodes

Correct Answer: B


Question 6:

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.

This information was gathered during the Assessment Phase:

There is a performance-based SLA for East–West traffic.

Business-critical applications require prioritization of their traffic.

One of the services is a file share and has a high demand for bandwidth.

Which selection should the architect include in their design? (Choose the best answer.)

A. Review average North/South traffic from the core switches and firewall.

B. Include a segment QoS profile and review the impact of utilizing this feature.

C. Meet with the organization\’s application team to get additional information.

D. Monitor East-West traffic throughout normal business cycles.

Correct Answer: B


Question 7:

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.

This information was gathered during the Assessment Phase:

The customer currently has a single 10-host vSphere cluster.

The customer wants to improve network security and automation.

Current cluster utilization and business policies prevent changing the existing vSphere deployment.

High availability is important to the customer.

Which three selections should the architect include in their design? (Choose three.)

A. Apply vSphere DRS VM-Host anti-affinity rules to the virtual machines of the NSX-T Edge cluster.

B. Deploy at least two NSX-T Edge virtual machines in the vSphere cluster.

C. Deploy the NSX Controllers in the management cluster.

D. Apply vSphere Distributed Resource Scheduler (vSphere DRS) VM-Host anti-affinity rules to NSX Managers.

E. Remove 2 hosts from the cluster and create a new edge cluster.

F. Remove vSphere DRS VM-Host affinity rules to the NSX-T Controller VMs.

Correct Answer: ACE


Question 8:

An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.

This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:

There are applications that use IPv6 addresses.

Network administrators are not familiar with NSX-T Data Center solutions.

Hosts can only be configured with two physical NICs.

There is an existing management cluster to deploy the NSX-T components.

Dynamic routing should be configured between the physical and virtual networks.

There is a storage array available to deploy NSX-T components.

Which constraint was documented by the architect? (Choose the best answer.)

A. Dynamic routing should be configured between the physical and virtual networks.

B. There are applications that use IPv6 addresses.

C. Hosts can only be configured with two physical NICs.

D. There are enough CPU and memory resources in the existing management cluster.

Correct Answer: A


Question 9:

Which two benefits can be achieved using in-band management of an NSX Bare Metal Edge Node? (Choose two.)

A. Reduces storage requirements.

B. Reduces cost.

C. Preserves packet locality.

D. Reduces egress data.

E. Preserves switch ports.

Correct Answer: BD


Question 10:

An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.

This information was gathered during a workshop:

Any proposed solution must provide low latency. Any proposed solution must provide high throughput. The customer is running stock trading applications.

Which two selections should the architect recommend to meet high-performance workload requirements? (Choose two.)

A. Leverage ESXi as the compute host.

B. Use LACP for all uplink profiles.

C. Leverage KVM as the compute host.

D. Enable enhanced data path mode on the N-VDS.

E. Enable latency sensitivity mode on the N-VDS.

Correct Answer: AD


Question 11:

An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.

Which risk is documented by an architect? (Choose the best answer.)

A. The security team has a firewall communication matrix documented.

B. The team is not trained for NSX-T but has a very strong experience with vSphere.

C. Open communication between different application tiers is not allowed.

D. Aggregate N-S throughput at any given time should be at least 10G.

Correct Answer: B


Question 12:

An architect is helping an organization with the Logical Design of an NSX-T Data Center solution.

This information was gathered during the Assessment Phase:

Data between two networks connected over a public network needs to be encrypted.

Certificate authentication is required.

Dynamic route learning is preferred.

Which selection should the architect include in their design? (Choose the best answer.)

A. Deploy a Tier-0 gateway in Active/Standby mode. Configure policy-based IPSec VPN with SHA512 with RSA as the hash algorithm.

B. Deploy a Tier-0 gateway in Active/Active mode. Configure route-based IPSec VPN with SHA512 with RSA as the hash algorithm.

C. Deploy a Tier-0 gateway in Active/Standby mode. Configure route-based IPSec VPN with SHA512 with RSA as the hash algorithm.

D. Deploy a Tier-0 gateway in Active/Active mode. Configure policy-based IPSec VPN with SHA512 with RSA as the hash algorithm.

Correct Answer: C


Question 13:

An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.

This information was gathered during a workshop:

Migrating existing data centers to KVM hosts.

Redundancy and high availability are required.

No component can be a single point of failure.

Which selection should the architect recommend? (Choose the best answer.)

A. Linux Bridge redundancy with Active/Active Mode and multiple pNICs with necessary binding

B. Linux Bridge redundancy with Active/Active Mode and single pNIC with static binding

C. vSS/vDS in Active/Standby Mode with necessary binding

D. vSS/vDS in Active/Active Mode with necessary pNICS and required binding modes

Correct Answer: C


Question 14:

An architect is helping an organization with the Conceptual Design of an NSX-T Data Center solution.

This information was gathered by the architect during the Discover Task of the Engagement Lifecycle:

There are applications that use IPv6 addresses.

Network administrators are not familiar with NSX-T Data Center solutions.

Hosts can only be configured with two physical NICs.

There is an existing management cluster to deploy the NSX-T components.

Dynamic routing should be configured between the physical and virtual networks.

There is a storage array available to deploy NSX-T components.

Which risk was documented by the architect? (Choose the best answer.)

A. Network administrators are not familiar with NSX-T Data Center solutions.

B. Dynamic routing should be configured between the physical and virtual networks.

C. There are applications that use IPv6 addresses.

D. There is a storage array available to deploy NSX-T components.

Correct Answer: B


Question 15:

An architect is helping an organization with the Physical Design of an NSX-T Data Center solution.

This information was gathered during a workshop about ESXi Host networking:

A total of 50 ESXi hosts are to be configured as Transport Nodes.

All ESXi hosts have a dedicated 2 × Intel 10Gbps Physical Network adapter for the Overlay Traffic.

To achieve low latency, high throughput, redundancy, and performance, which two NIC teaming policies

should the architect recommend? (Choose two.)

A. Load Balance Source MAC

B. Load Balance Port ID

C. Load Balance Source

D. Load Balance Source Port ID

E. Failover Order

Correct Answer: DE


 

These are just some of the VMware 3V0-42.20 dumps practice material, you can improve yourself with the above questions and answers, and download the full Lead4pass 3V0-42.20 dumps for more.

In conclusion,

Remember that Lead4pass 3V0-42.20 dumps (PDF or VCE) https://www.leads4pass.com/3v0-42-20.html are your ally to pass the VMware 3V0-42.20 exam, make good use of the 3V0-42.20 practice material inside, prepare for the 3V0-42.20 exam, you will be successful.

vmwarefreedumps

On our VMware platform, you can search for all free VMware exams and test or practice online for yourself. And can download PDF files. Any other questions, you can email [email protected]