The newly updated VMware 5v0-42.21 dumps contain 52 exam questions and answers that candidates can study using the 5v0-42.21 dumps PDF and 5v0-42.21 dumps VCE to help you successfully pass the 5v0-42.21 VMware SD-WAN Design and Deploy Skills exam.
You are welcome to download the latest VMware 5v0-42.21 dumps: https://www.leads4pass.com/5v0-42-21.html, Lead4Pass 5v0-42.21 dumps serve all candidates taking the 5v0-42.21 VMware SD-WAN Design and Deploy Skills exam and guarantee you 100% Successfully passed the 5v0-42.21 VMware SD-WAN Design and Deploy Skills exam.
Download the VMware 5v0-42.21 PDF for free sharing online:
https://drive.google.com/file/d/1J-8VQdz610lSlnh8ii7wLcpBlS-d4uiY/
Share the latest VMware 5v0-42.21 dumps exam questions and answers for free
NEW QUESTION 1:
Which feature is required to prevent a split-brain condition for a branch in an Enhanced HA
A. Split Brain Detection
B. SD-WAN Service Reachable on the private overlay
C. Cloud VPN
D. VRRP
Correct Answer: B
NEW QUESTION 2:
Which VMware SD-WAN Edge High Availability deployment is being used”?
A. Enhanced HA
B. Fault Domain HA
C. VRRP HA
D. Standard HA
Correct Answer: C
NEW QUESTION 3:
Company A has recently acquired Company B and needs to establish network connectivity. Company A has only Cisco for firewalls and VPNs. Company B is using VMware SD-WAN.
Which VMware SD-WAN Cloud VPN solution should an administrator configure to establish connectivity?
A. Branch to Non-VMware SD-WAN Site.
B. Branch to SD-WAN Hub
C. Branch to Main Office VPN
D. Branch to Branch VPN
Correct Answer: A
NEW QUESTION 4:
A VMware SD-WAN customer has a requirement to enable single sign-on (SSO) authentication to their
existing provider (idp) for access to their Orchestrator account.
Which authentication protocol is supported?
A. OpenID Connect (OlDC)
B. LDAP
C. SAML 2.0
D. TACACS+
Correct Answer: C
NEW QUESTION 5:
A customer has a 10,000 branch site requirement arid must use a hub cluster in their design.
Which Mware SO- WAN best practice should be used when designing the cluster?
A. BGP on WAN side
B. Static routing
C. MP BGP south bound
D. BGP on LAN side
Correct Answer: C
NEW QUESTION 6:
Refer to the exhibit.
An MSP is designing a solution for a merger of Customer A and Customer B to Customer A\’s enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?
A. 4 segments
B. 2 segments
C. 6 segments
D. 5 segments
Correct Answer: D
NEW QUESTION 7:
A customer is using Office 365.
How would the VMware SD-WAN recognize this application correctly?
A. The VCE supports prioritization and QoS. Each application is assigned one of the three Service Classes and three Business Priorities.
B. Top SaaS Apps (TLS encrypted) are identified using put. IP and port range Other TLS traffic can be identified based on the certificate information.
C. Office 365 has to be added as part of customizing the Application Map by TCP/UDP port and subnet ranges.
D. VMware SD-WAN will use SSL inspection to detect Office 365.
Correct Answer: D
NEW QUESTION 8:
Which port is used for communication between VMware SD-WAN Edge and Orchestrator if there are no tunnels established to the Gateways?
A. UDF 2426
B. TCP 80
C. TCP 443
D. UDP 500
Correct Answer: B
NEW QUESTION 9:
A network architect is designing a VMware SD-WAN architect for customers using VMware-hosted VCO and VCGs, white VCEs will be deployed at the customer\’s branches and data centers. The network architect would like to achieve control plane redundancy.
Which action, if any, should be taken to meet this goal?
A. Multiple VCGs are automatically assigned to every VCE and the control plane on VCUs is always enabled, so control plane redundancy has been taken care of already
B. Multiple VCFs at data centers can be contoured to function as route reflectors to achieve control plane redundancy.
C. VCGs are automatically assigned to a VCF. do not participate in the control plane At least two dedicated Controllers should be manually assigned for each VCG to achieve control plane redundancy.
D. VCGs automatically assigned to a VCE do not participate in control plane At least two dedicated Controllers should be manually assigned for the customer to achieve control plane redundancy
Correct Answer: B
NEW QUESTION 10:
An Enterprise customer just acquired a new company, and the Network Enterprise administrator was tasked to integrate over 20 new branches into their existing SD-WAN network. However, these branches have overlapping IPs with the existing branch subnets.
A. Configure a NAT hand-off rule at the VMware SD-WAN gateway assigned to these new blanches, translating the new branch subnets into a new nan-overlapping subnet
B. Configure a LAN-side NAT rule at the branch device settings, translating its subnets into a new non-overlapping subnet
C. Configure a NAT firewall rule in each branch, translating its subnets into a new non-overlapping subnet
D. Configure a policy-based NAT for each branch translating its subnets Into a new non-overlapping subnet
Correct Answer: B
NEW QUESTION 11:
A customer would like to ensure that the traffic towards the Partner Gateway does not exceed a certain
bandwidth.
Which feature should be used?
A. Modify the SD-WAN Traffic Class and Weight Mapping
B. Enable the SD-WAN Overlay Rate-Limit.
C. Change the application priority to low.
D. Enable the rate limit under a new custom Business Policy Rule.
Correct Answer: C
NEW QUESTION 12:
Due to very strict security policies, an enterprise customer is looking for an on-premises deployment of the VMware SD-WAN Orchestrator and Controllers. Customer data is not expected to flow through this Controller, however, it is desirable that management plane traffic towards the Orchestrator coming from VMware SD-WAN Edges can take the overlay tunnels through these controls.
What are some of the needed steps to achieve the requirements above?
A. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane, and enable management plane forward
B. Under gateway configuration -> Configure the Gateway roles as Control Plane, disable Data Plane and add static host routes with NAT hand-off settings porting to the Orchestrator IPs under Partner Gateway advanced hand off settings
C. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plane, and Partner Gateway role and add static host mules with NAT hand-off settings pointing to the Orchestrator IPs under Partner Gateway advanced hand-off settings
D. Under gateway configuration -> Configure the Gateway roles as Control-Plane, enable Data Plant- and Partner Gateway role and add a static default route with NAT hand-off settings under Partner Gateway advanced hand oft settings
Correct Answer: C
NEW QUESTION 13:
Which form factor can a customer use to deploy VMware SD-WAN Edge?
A. Oracle Virtual Box
B. Open Virtualization Appliance
C. Docker Container
D. Hyper-V Virtual Machine
Correct Answer: B
…
Download the VMware 5v0-42.21 PDF for free sharing online:
https://drive.google.com/file/d/1J-8VQdz610lSlnh8ii7wLcpBlS-d4uiY/
The above is only a part of VMware 5v0-42.21 dumps exam questions and answers, you can use the above exam questions and answers to improve yourself, not only that, we welcome you to download the latest VMware 5v0-42.21 dumps exam questions: https://www.leads4pass.com/5v0-42-21.html (Total Questions: 52 Q&A), help you truly pass the 5v0-42.21 VMware SD-WAN Design and Deploy Skills exam.
More IT certification blogs: [Amazon]awsexamdumps.com, [Oracle]oraclefreedumps.com, [Cisco]ciscofreedumps.com, [Microsoft]examdumpsbase.com, [Citrix]citrixexamdumps.com
[CompTIA]comptiafreedumps.com, [VMware]vmwarefreedumps.com, [IBM]ibmexamdumps.com, [HP]hpexamdumps.com, [NetApp]NetAppexamdumps.com, [Juniper]juniperexamdumps.com
[Fortinet]fortinetexamdumps.com