Lead4pass 5V0-21.21 Dumps Actual Exam Practice Materials Help You To Clear Exam 2023

5V0-21.21 Dumps Practice Material

5V0-21.21 dumps play a key role in preparing to pass the VMware 5V0-21.21 exam, providing real practice materials for the exam to ensure a successful pass.

Lead4pass 5V0-21.21 dumps (PDF or VCE) https://www.leads4pass.com/5v0-21-21.html Updated 5V0-21.21 exam practice materials with the latest and most accurate answers 50+, worth learning.

[Newest Version] Free 5V0-21.21 Exam Questions 100% Pass Exam

The following questions and answers are from the latest 5V0-21.21 free dumps. 

Question 1:

In a stretched vSAN cluster, how is Read Locality established after failover to the secondary site?

A. 100% of the reads come from vSAN hosts on the local site

B. 50% of the reads come from vSAN hosts on the local site

C. 100% of the reads come from vSAN hosts on the remote site

D. 50% of the reads come from vSAN hosts on the remote site

Correct Answer: A

Reference: https://www.vmware.com/files/pdf/products/vsan/vmware-virtual-san-6.1-stretched-clusterguide.pdf (45)


Question 2:

In a vSAN stretched cluster, which value must be set in the vSAN policy if there is no requirement for data mirroring across sites?

A. SFTT = 0

B. SFTT = 1

C. PFTT = 1

D. PFTT = 0

Correct Answer: A

Reference: https://www.delltechnologies.com/asset/en-us/products/converged-infrastructure/technicalsupport/h15275-vxrail-planning-guide-virtual-san-stretched-cluster.pdf (5)


Question 3:

An architect needs to automate an infrastructure that supports VMware Horizon as well as VMware Tanzu. Which solution mandates the use of VMware vSAN?

A. VMware Cloud Foundation

B. VMware Horizon

C. VMware Tanzu

D. VMware vRealize Automation

Correct Answer: D

Reference: https://www.vmware.com/products/vrealize-automation.html


Question 4:

An administrator is setting up vSAN file services on a vSAN cluster.

Which two security policies on the distributed port groups are automatically enabled in the process? (Choose two.)

A. Forged Transmits

B. Promiscuous Mode

C. DVFiltering

D. Jumbo Frames

E. MacLearning

Correct Answer: AB

Reference: https://www.yellow-bricks.com/2020/04/15/vsan-file-services-considerations/


Question 5:

An administrator has been tasked to reboot a node in an encrypted vSAN cluster. The vSAN disk groups on that node become locked after rebooting the node.

Which step should be performed to exit the locked state?

A. Manually replace the Host Encryption Key (HEK) of each affected host.

B. Restore the communication with the KMS server, and re-establish the trust relationship.

C. Replace the caching device in each affected disk group.

D. Run /etc/init.d/saved restart to rescan the VASA providers.

Correct Answer: B


Question 6:

A customer is planning to deploy a vSAN cluster to host their in-house distributed ERP system. The hardware specifications for their server nodes include:

2 x Intel Xeon CPU E5-2697 v3 @ 2.60GHz 1TB memory

Which boot device is supported for the vSAN ESXi nodes for this customer?

A. A 16GB single-level cell (SLC) SATADOM device must be used.

B. A 4GB USB or SD device must be used.

C. A 16GB multiple-level cell (MLC) SATADOM device must be used.

D. ESXi Hosts must boot from a PMEM device.

Correct Answer: C


Question 7:

Upon investigating a workload performance issue, a vSAN administrator observed a high backend IOPs on a vSAN cluster.

Which two causes explain this behavior? (Choose two.)

A. The cluster DRS threshold has been set to Aggressive.

B. There is a vSAN node failure.

C. The vSAN Resync throttling is enabled.

D. The object repair timer value has been increased.

E. The vSAN policy protection level has changed from FTT=0 to FTT=1.

Correct Answer: CE

Reference: https://core.vmware.com/resource/troubleshooting-vsan-performance#_Toc536646878


Question 8:

An administrator wants to check the performance metrics for the workloads and their virtual disks that are running on a vSAN cluster, but no statistical charts are displayed in the vSphere client.

Why is this behavior being seen?

A. vSAN network diagnostic mode is not enabled.

B. vSAN proactive tests haven’t been run yet.

C. vSAN performance service is turned off.

D. vSAN performance verbose mode is not enabled.

Correct Answer: C

Some tools allow for measuring latency peaks. This unfortunately isn’t ideal, as it can unfairly represent statistical outliers, which may very well occur when there is little to no I/O activity. The best way to understand the actual behavior of VM and application latencies is to observe in time-based performance graphs. Depending on the level of detail, you may need to measure at the individual VMDK level. Become familiar with these graphs to determine what is normal, and what is not for that given application. This is where you can use the built-in functionality of vCenter and the vSAN performance service metrics to gather this information.

Reference: https://core.vmware.com/resource/troubleshooting-vsan-performance#_Toc536646873


Question 9:

During a maintenance action on a vSAN node, a vSAN administrator noticed that the default repair delay time is about to be reached.

Which two commands must be run to extend the time? (Choose two.)

A. /etc/init.d/vsanmgmtd restart

B. esxcli system settings advanced set -o /VSAN/ClomRepairDelay -i 50

C. esxcli system settings advanced set -o /VSAN/ClomRepairDelay -i 80

D. /etc/init.d/clomd restart

E. /etc/init.d/vsanobserver restart

Correct Answer: CD

Reference: https://kb.vmware.com/s/article/2075456


Question 10:

An administrator wants to deploy a desktop and application virtualization solution on top of vSAN. Which VMware product should the administrator install?

A. VMware Dynamic Environment Manager

B. VMware Horizon Apps

C. VMware Workspace One Access

D. VMware Horizon

Correct Answer: D


Question 11:

Upon checking the latency goal under vSAN performance diagnostics, the vSAN Administrator sees this

message displayed:

The increase in latency in the vSAN stack might be beyond the expected limits.

Which two root causes can be identified to help remediate the issue? (Choose two.)

A. vSAN VMKemel port group is configured with the “Route based on IP hash” teaming policy

B. vSAN encryption is enabled

C. Large packet losses and retransmissions on the network layer

D. Incorrect sizing of the disk groups’ capacity disks

E. One or more disk groups are congested

Correct Answer: CE

Reference: https://kb.vmware.com/s/article/2150018


Question 12:

An architect is designing for a production vSAN cluster, and the customer introduced these requirements

related to File Services:

A minimum of 12 file shares.

30TB NFS capacity to mount workload VMs.

What should be the architect\’s recommendations?

A. Point out the risks regarding putting the hosts in maintenance mode in terms of FSVM.

B. Confirm all of the requirements and move forward with the physical design.

C. Raise concerns regarding support when running VMs on an NFS share as risk.

D. Highlight the required number of nodes required for the vSAN cluster as a constraint.

Correct Answer: D


Question 13:

An administrator has received an alert indicating that a single-capacity device is close to failing within the production vSAN Cluster. The administrator must now complete preemptive maintenance on the vSAN Cluster without impacting the availability of workloads or vSAN File Services.

The following information is known about the vSAN Cluster: vSAN 7. x Cluster vSAN node count: 8 De-Duplication and Compression: Enabled. Encryption: Disabled Current Utilization: 45% Disk Groups: 2 Devices per node: 2 x 400 GB SSD, 6 x 1.8 TB SSD

Which three steps should the administrator take to successfully complete the task? (Choose three.)

A. Remove the affected Disk Group from the vSAN Cluster, and choose Full Data Migration.

B. Replace the failed disk with a storage device that is identical in class and capacity.

C. Remove the affected Disk Group from the vSAN Cluster, and choose No Data Migration.

D. Replace the failed disk with a storage device that is identical in class but smaller in capacity.

E. Put the affected vSAN host into maintenance mode to physically replace the storage device.

F. Remove the affected Disk from the Disk Group, and choose Full Data Migration.

Correct Answer: ABF


Question 14:

Due to the success of the recently deployed developer-only private cloud solution, a company has a new requirement to at least double the usable capacity in their all-flash vSAN cluster.

The vSAN cluster is deployed into a co-located data center that is owned by a third-party hosting company. The hosting company charges a fixed monthly cost for rack space and power consumption. The service owner has been given a limited budget for additional hardware purchases, but not for ongoing co-location costs.

The current vSAN cluster has the following configuration: 10 vSAN Nodes with 2 CPUs (20 cores), 512 GB RAM

1 Disk Group per vSAN node

-1 x 400 GB

-4 x 1.8 TB

De-duplication and Compression are enabled.

vSAN Capacity is currently:

-Total: 72 TB

-Usable: ~40 TB (FTT1/RAID1) and ~60 TB (FTT1/RAID5).

As a result of any action taken, the service owner would like to ensure that the overall availability of the vSAN cluster is increased.

Which two recommendations meet the requirement to increase capacity while maintaining service availability? (Choose two.)

A. Install an additional 400 GB SSD and 4 x 1.8 TB SSDs per vSAN node.

B. Update the existing Disk Group, and claim the newly installed drives for each node.

C. Create a new Disk Group, and claim the newly installed cache and capacity SSD drives for each node.

D. Install an additional 3 x 1.8 TB SSDs per vSAN node.

E. Replace existing SSDs with an 800 GB SSD and 4 x 3.8 TB SSDs per vSAN node.

Correct Answer: CD


Question 15:

A customer has upgraded to vSAN 7, but there is still an existing legacy host which must be removed from the vSAN cluster.

Which three steps must an administrator take to successfully remove this host from the vSAN cluster? (Choose three.)

A. Place the host in maintenance mode with Ensure Accessibility

B. Disconnect from vCenter Server

C. Place the host in maintenance mode with Full Data migration

D. Place the host in maintenance mode with no data migration

E. Remove from the vSAN cluster

F. Delete the disk group(s) on the legacy host

Correct Answer: CEF

Reference: http://www.vexpertconsultancy.com/2019/06/step-by-step-remove-a-node-permanently-from-avsan-cluster/


 

These are just some of the VMware 5V0-21.21dumps practice materials, you can improve yourself with the above questions and answers, and download the full Lead4pass 5V0-21.21 dumps for more.

In conclusion, remember that Lead4pass 5V0-21.21 dumps (PDF or VCE) https://www.leads4pass.com/5v0-21-21.html are your ally to pass the VMware 5V0-21.21 exam, make good use of the 5V0-21.21 practice materials inside, prepare for the 5V0-21.21 exam, you will be successful.

vmwarefreedumps

On our VMware platform, you can search for all free VMware exams and test or practice online for yourself. And can download PDF files. Any other questions, you can email [email protected]